Keeso Seal 540 Waterproofing Application Solution for Bathroom, Terrace, Kitchen & Balcony

Cityads.lk පාරිහෝගිකයන් සදහා 25% වට්ටම ක්සහ නොමිලේ අලපනය කිරීම සදහා brush එකක් ලබා ගන්න. අදම අමතන්න.
Original Price : Rs. 42,500.00
Discount Price: Rs. 31,875.00

KeesoSeal 540 Waterproofing application solution

for Bathroom, Terrace, Kitchen & Balcony

DESCRIPTION:

KeesoSeal 540 is a two parts, prepacked system, consisting of a liquid polymer as Part A and a premixed powder as Part B. The two parts on mixing yield a brushable, smooth slurry with excellent bond to most substrates. The product is based on selected synthetic resins and cements.

FIELDS OF APPLICATION:

KeesoSeal 540 is designed to be used as an effective waterproofing membrane on a variety of substrates. Applications include:

Waterproof coatings to the internal faces of water tanks, sumps, reservoirs, planter boxes etc., before tiling or other surface finishing.

Treating terraces, balconies, and kitchen & toilet floors as a sandwich treatment, to prevent water ingress.

Treating bridge & flyover decks before wearing course to protect concrete from rainwater ingress.

Surface Preparation :

Correct substrate preparation is critical for optimum performance.

Surfaces should be structurally sound, clean, and free from loose particles, oil, grease, or any other contaminants.

Cement laitence, loose particles, mould release agents, curing membranes, and other contaminants must be removed by wet grit blasting, high pressure water jetting (approx. 150 bars) or such other effective methods.

Fill surface irregularities such as blow holes, honeycombs etc., with an EMACO repair mortars to achieve a smooth and level suace.

Saturate the prepared substrate with clean water before applying KeesoSeal 540.

MIXING:

Mechanical mixing is necessary. A slow speed (600 rpm), heavy-duty electric drill with a wing type paddle is recommended. Place approx. 75% of Part A of the pack in a clean pail. Keeping the mixer running, add the Part B slowly. Mix for at least 3 minutes to get a lump-free homogenous mix. While continuing to mix, add all of the remainder of Part A if applying on a horizontal surface, or a part of it if applying on vertical surfaces till the required consistency is obtained.

CURING:

Slow drying of KeesoSeal 540 membrane ensures homogenous curing and high waterproofing characteristics.

KeesoSeal 540 must be protected against rapid drying due to high temperatures or wind. Curing by wet burlap, polyethylene sheet or a curing compound.

Note : Worm - gear type of sprayers do not normally have a mixing arrangement. Therefore, material has to be mixed separately and fed to the spraying machine.

ESTIMATING DATA:

The minimum recommended coverage of KeesoSeal 540 is 0.35-0.4 kg/m2 to get 0.5 mm to 0.75mm thick film build per coat. Actual coverage depends upon the method of application, the texture and porosity of the surface.

Note : Avoid using part packs. Use only mix of complete pack.

PACKAGING:

KeesoSeal 540 is available in 15 kg packs containing 5 kg of Part B in a multi-ply paper sack with polythene liner, and 10 kg of Part A in a plastic container. For large jobs, bulk packing of Parts A and B are also available.